Profile

unixronin: Galen the technomage, from Babylon 5: Crusade (Default)
Unixronin

December 2012

S M T W T F S
      1
2345678
9101112131415
16171819202122
23242526272829
3031     

Most Popular Tags

Expand Cut Tags

No cut tags
Sunday, January 20th, 2008 02:05 pm

Visible flyback lines on vorlon's Sun GDM5410 monitor today.  This is not a good sign.  Both of my monitors, it seems, are on their last legs, and there isn't really spare cash in the budget right now to replace them.  (Technically, there's cash in the bank, but I don't want to cut into it until we have to.)

We have one spare GDM5410 upstairs in storage, but I'm not convinced it's in much better shape than this one is.  They both seem to have the same problem — severe loss of screen saturation, requiring turning contrast all the way up to get any kind of decent saturation at all, which then forces turning brightness all the way down to have the screen not be washed out.  I suspect it's a design flaw on this monitor series, which is a terrible shame, because the completely flat (horizontally and vertically) CRT is the best I've ever used as far as image quality and lack of glare, and unlike an LCD, it continues to look good at resolutions which are not exact power-of-2 divisors of its native maximum resolution.

Wednesday, January 23rd, 2008 02:12 am (UTC)
That one is odd. Focus is electrostatic, degaussing just effects the shadow mask. I suspect a CRT problem but ... I have seen a focus issue when the HV connection to the tube does not have the HStat hooked up right but that's permanent and is an assembly error.

Sony's HV resistor/divider block which has the HStat adjustment on it have a very high failure rate. If I had access to it I'd adjust the HStat and focus and see what each did while it's not working. HStat is horizontal static convergence and it will look kind of out of focus if slightly off or look like a 3D movie with three colors when way off.

I bought a 3000:1 contrast 19" LG LCD and it rocks.


Wednesday, January 23rd, 2008 11:35 am (UTC)
This 90D10 has a bit of a history of not being able to get HStat perfect across the full width. If it's dead-on at one side, it's fractionally off at the other. I've always had to sett for a "good compromise". Ironically, that seems like it may have gotten a little better; convergence seems pretty close to dead-on all the way across now.