Nothing's ever straightforward

[unixronin]

Good news:  The house repairs are almost finished.  On a smaller scale, I finally found a source of affordable cartridge brass for my 1889 Martini-Henry rifle.  (For those interested in such things, Gad Custom Cartridges, $30 for 20 unprimed cases, $45 for 20 rounds of loaded ammunition.)  I also got a pointer from lwj2 for 5-round magazines for my M14.  Either of those would give me a shot (literally) at putting a deer or two in the freezer to help with the food bills.  (Though my gradually deteriorating vision would be a handicap.  I can't see iron rifle sights clearly any more, and I don't have a working 'scope mount for the M14.)

Bad news:  I can’t afford to actually buy any, because New Hampshire unemployment is now eight weeks behind on cymrullewes' unemployment benefits.  That's about $3600 owing to us, without which we don't have enough in the bank to cover the mortgage, the car payment, and the electric bill¹ this month — let alone fill the kerosene tank² or buy propane for winter heat.³  We can't get any clear answers out of them as to what's going on; just "We'll get back to you".

Supposedly, they're switching over to a different system that uses direct deposit instead of mailing checks.  But come ON, people!  When you're changing a system that's vital to many people to keep a roof over their heads, you test it BEFORE you switch over to it!

[1]  On which, I discovered when I went to pay it this morning, we're a month behind.  The combination of "where the hell are the unemployment benefits" and the chaos of emergency house repairs has really disrupted our routines.

[2]  Granted, the kerosene tank only supplies our demand water heater and the emergency-backup monitor heater in the dining room.  The quarter-tank that's in it now will take us most of the way through the winter — basically we use about three quarters of a tank of kerosene per year — and we only used 50 gallons of propane (for cooking) since about April when we turned the heat off for the summer.  But with the totally inadequate insulation in our roof, we go through a LOT of propane for winter heat.  (It's insulated to maybe R-10, whereas the roof insulation recommendations for this climate zone now call for R-60.)  We didn't know the roof was this poorly insulated when we bought the house, and fixing it requires rebuilding the roof.

[3]  We applied for energy assistance, because we didn't know how we were going to cover winter heat bills on just cymrullewes' unemployment and my disability, but we were notified yesterday that we got denied because we're apparently over the income limit by a couple of hundred dollars a month.  We don't know yet whether this means we're also not getting the winterization they promised us in return for letting them use our house as a test house for energy-auditing students.

Comments

[unixronin.livejournal.com]

I'm not familiar with the Leatherwood. If it's steel, that alone is probably a big improvement over any of the aluminum ones. The one I had in mind is the Sadlak steel mount (http://www.sadlak.com/si_rifle_parts_sm.html). The Leatherwood mount looks pretty similar, conceptually, and is a lot less expensive.

How does the clip-guide-slot adapter on the Leatherwood mount to the receiver? The Sadlak clamps the clip-guide replacement in place with set-screws, but the Springfield Armory mount I tried first had to have it's clip-guide block roll-pinned in place.

It's all probably a bit moot at the moment, though. Unless either I or cymrullewes finds a job or the NH Unemployment Security Department gets its finger out in pretty short order, I don't know what we're buying food with this month.

[pdbonlj.livejournal.com]

Here's a pdf of the install instructions: http://www.hi-luxoptics.com/images/instructions/new%20m14mt%20installation.pdf

I think it's a pretty well thought out system, but I decided to keep my M1A as an irons only match rifle for now.

[unixronin.livejournal.com]

Yeah, that looks like a pretty well thought out design. Omission of the vertical lug should also mean it's unaffected by spec variations between GI and Springfield receivers.

I'm distinctly interested, assuming we can somehow get the logjam in NHUSD cleared.